Electric patient lifting and transfer chair – hoist

€1.825,00

The product includes 2 seats -one simple and one with a hole- and a restraint belt

Additional accessoriesThe product includes 2 seats -one simple and one with a hole- and a restraint belt

Additional accessories

Latex Seat Latex Seat €100,00
Swivel seat Swivel seat €33,00
Walker seat Walker seat €100,00
Patient restraint belt Patient restraint belt €25,00
Seat with hole Seat with hole €80,00
EasyGO seat EasyGO seat €80,00
SKU: easygo Category:

Description

EASYGO DESIGN

In summary, what we need to know in order for easyGO to serve us best :

  • When the person we care for, is communicating and has basic back support
  • The gap under the bed must be 16 cm high so that the easyGO base can pass through
  • The wheelchair footrests that easyGo will approach must be removable or foldable. In this way we have the maximum approach
  • The opening of the door should be 68 cm so that it can pass through the door

 

TIPS:

Wider base

It would be better if we pre-adjust the width of the base without the patient on the easyGO either opening one leg of the base or both of them

In case the patient is already sitting then it would be helpful to place a small bath seat underneath the pelvis/buttocks, so that it can “bear” the patient’s weight and then easily pull the base from both sides and adjust it

In case we often use the opening base ,it would be advisable to choose the model with the easyopen system

Note: The electronic parts must not get wet

Technical characteristics

External  width of the adjustable base 67 – 105 cm
Internal width of the adjustable base 56-93 cm
Length 108 cm
Base height 15 cm
Minimum seat height from the ground 38 cm
Maximum seat height from the ground 78-88 cm
inner width between the arms 45 cm
Maximum user weight 115 kg
Total  weight 35 kg
Frame weight without electronic parts 10 kg
Diameter of front double wheels with brake 12 cm
Diameter of double rear wheels without brake 10 cm
Packing 91 x 66 x 39
Battery (up to 40 uses until next charge) 12Volt
Piston stroke 40 cm

EASYGO DESIGN

In summary, what we need to know in order for easyGO to serve us best :

  • When the person we care for, is communicating and has basic back support
  • The gap under the bed must be 16 cm high so that the easyGO base can pass through
  • The wheelchair footrests that easyGo will approach must be removable or foldable. In this way we have the maximum approach
  • The opening of the door should be 68 cm so that it can pass through the door

 

TIPS:

Wider base

It would be better if we pre-adjust the width of the base without the patient on the easyGO either opening one leg of the base or both of them

In case the patient is already sitting then it would be helpful to place a small bath seat underneath the pelvis/buttocks, so that it can “bear” the patient’s weight and then easily pull the base from both sides and adjust it

In case we often use the opening base ,it would be advisable to choose the model with the easyopen system

Note: The electronic parts must not get wet

Technical characteristics

External  width of the adjustable base 67 – 105 cm
Internal width of the adjustable base 56-93 cm
Length 108 cm
Base height 15 cm
Minimum seat height from the ground 38 cm
Maximum seat height from the ground 78-88 cm
inner width between the arms 45 cm
Maximum user weight 115 kg
Total  weight 35 kg
Frame weight without electronic parts 10 kg
Diameter of front double wheels with brake 12 cm
Diameter of double rear wheels without brake 10 cm
Packing 91 x 66 x 39
Battery (up to 40 uses until next charge) 12Volt
Piston stroke 40 cm